This case introduces the Suma Park North Wastewater Treatment Plant Project, which uses a C-AAO combined biochemical pool + micro-flocculation filtration process, and the drainage complies with the town Class A standard. The raw water is treated with high-efficiency dissolved air flotation produced by our plant to remove more than 90% of SS. The reduced concentration of suspended solids can reduce the treatment load of the combined biochemical pool and improve the treatment efficiency.
This case study introduces how Environmental Protection Technology City Industrial Wastewater Treatment Plant Project uses our factory's high-efficiency dissolved air flotation to treat oily wastewater, such as machining and cutting fluids. After treatment, the effluent quality was significantly improved, the effluent indexes of animal and vegetable oils and petroleum reached about 1 mg/L, and the total phosphorus removal rate was over 98%.
Yancheng Dongtai Bizhiyuan Water Purification Co., Ltd. Industrial Wastewater Treatment Plant. After being treated by flotation equipment, the effluent indicators meet the following requirements: SS≤ 10 mg/L, TP≤ 1.8 mg/L. The SS removal rate is ≥90%, and the TP removal rate is ≥70%.
Although automobile painting wastewater has high water quality complexity and is difficult to treat, it is necessary to classify, collect, and pre-treat wastewater according to quality as long as the characteristics of the wastewater are understood and appropriate treatment processes are adopted.
The wastewater generated during the coating production process of the enterprise has the characteristics of many types of pollutants, high concentration, complex composition, intermittent discharge of wastewater and irregular discharge time, poor biodegradability, etc. Reasonable selection of wastewater treatment methods and design of treatment processes that meet the requirements of the enterprise according to different process characteristics in accordance with local conditions can improve the treatment efficiency of wastewater, reduce treatment costs and shorten the treatment cycle.
Sewage treatment is a crucial aspect of environmental protection projects. It requires proper planning and implementation to ensure its effectiveness. To improve the quality of sewage treatment, a treatment mode of pre-treatment, primary, secondary, and tertiary linkage is established based on the current status of sewage pollution. The joint application of various technologies is used to achieve sound sewage treatment effects. As industry technicians, it is essential to grasp the critical points of sewage treatment accurately, operate reasonably, optimize the technology, and improve its feasibility as the industry develops.Wuxi Yosun Environmental Protection Equipment Co.,Ltd
